• Read Mroe About acoustic fabric
  • Home
  • News
  • How to read poplin shirt fabric specifications before ordering
Nov . 16, 2026 01:06 Back to list

How to read poplin shirt fabric specifications before ordering

THE BUYER BULLETINSPEC DESK

Poplin shirt fabric specifications show whether a roll fits your garment plan. The TC fabric covered here uses 80% Polyester, 20% Cotton, a 45x45 yarn count, 110x76 density, 100 gsm weight and 58 Inches width. We explain what each value means for shirts, how the finish and dyeing process affect production, and which details to confirm before requesting a quote.

How to read poplin shirt fabric specifications before ordering
Illustration for reference; see the product page for actual photos and specifications.

At a glance

80% Polyester, 20% Cotton
Material composition

45x45
Yarn count

110x76
Fabric density

100 gsm
Fabric weight

Start with the fabric identity

The first ordering decision is whether the fabric construction matches the shirt or garment part you are making. Our TC poplin uses 80% Polyester, 20% Cotton and is classified as Poplin (TC Fabric). This blend identifies a poly-cotton poplin shirt fabric, so it is a practical starting point for professional shirts, aprons and garment pockets.

Polyester and cotton contribute different characteristics to the fabric. The polyester share supports strength and wear resistance, while the cotton share contributes a softer hand. For a repeat production order, confirm that the composition on the quotation matches 80% Polyester, 20% Cotton, especially if your product specification calls for a particular fiber balance.

Read the construction numbers together

The fabric has a 45x45 yarn count and 110x76 fabric density. Yarn count describes the yarn specification used in the construction. Density describes the fabric construction through the stated 110x76 value. These two entries should be read together because they affect the cloth structure, surface and cutting behavior.

ParameterStated valueWhy it matters when ordering
Material composition80% Polyester, 20% CottonConfirms the fiber balance and the intended TC construction.
Fabric typePoplin (TC Fabric)Identifies the poplin structure for shirt, apron and pocket applications.
Yarn count45x45Describes the yarn specification used in the fabric construction.
Fabric density110x76Helps you compare the construction of repeat orders.
Fabric weight100 gsmIndicates the fabric mass used when planning garment feel and consumption.
Weight range70-175 gsmShows the available weight span for different garment requirements.
Total width58 InchesSets the usable fabric width to check against marker planning.
Weaving technicsAir-jet Machine QualityIdentifies the weaving quality and production method.
Dyeing processContinuous / Jigger DyeingIdentifies the dyeing routes used for the fabric.
Surface finishMercerized for brightnessIndicates the finish applied to create a neat, bright surface.
Color fastnessGrade 3-4 (Light to Dark)Gives the stated shade-dependent color fastness grades.

When you compare suppliers, keep yarn count and density in the same request. A weight match alone does not describe the full construction. Ask for the same 45x45 and 110x76 values if you need to compare like with like.

Use weight and width for cutting decisions

The stated fabric weight is 100 gsm, with a range of 70-175 gsm available. GSM means grams per square meter and gives you a consistent way to compare fabric mass. A lighter or heavier option changes the hand, coverage and material consumption of a shirt, so select the weight against the garment pattern and wearing requirement.

The total width is 58 Inches. Width affects marker efficiency and the amount of fabric needed for each cut plan. Before ordering, place the shirt pattern or marker against the 58 Inches width and confirm how the finished fabric width is measured for your order. If your design needs another weight, identify the required point within the 70-175 gsm range instead of referring only to “poplin.”

Check weaving, dyeing and finish

Air-jet Machine Quality identifies the weaving quality in this specification. For a production buyer, this entry helps keep the manufacturing route consistent across repeat orders. Confirm that the requested construction, weight and width are attached to the same air-jet quality description.

The dyeing process is Continuous / Jigger Dyeing. This tells you which dyeing routes are associated with the fabric. Include the required shade and the dyeing process in your order discussion so the color request is connected to the correct fabric construction.

The surface finish is Mercerized for brightness. Mercerization is the finish used here to produce a neat, bright surface. That matters when shirts need a clean appearance after cutting and sewing. Ask for the mercerized finish to remain part of the specification when approving a repeat order, rather than accepting a general poplin description.

Read color fastness by shade group

Color fastness is given as Grade 3-4 (Light to Dark). The value is shade-dependent, so light and dark colors should not be treated as one identical result. Confirm the intended shade group during color approval and keep the grade wording with the order specification.

For a shirt range using several colors, organize approval by shade and retain the chosen composition, weight, width and finish with each color reference. This keeps color decisions connected to the fabric parameters that control cutting and sewing.

Compare composition, yarn count, density, weight and width as one order specification. Use 100 gsm and 58 Inches as the reference values for this fabric, and identify any requested point within 70-175 gsm. Confirm the shade group for Grade 3-4 (Light to Dark), and keep Air-jet Machine Quality, Continuous / Jigger Dyeing and Mercerized for brightness in the repeat-order description.

Questions to settle before the quote

Is 58 Inches the right width for a shirt marker?

Yes, 58 Inches is the stated total width. Use it as the starting dimension for your marker review, then confirm how the supplier measures the width supplied for your order. The width should be considered alongside the shirt pattern, fabric weight and construction because a width that fits one marker may not produce the same consumption for another design.

Which weight should we choose within 70-175 gsm?

Choose the point within 70-175 gsm that matches the garment’s intended hand and coverage. The reference construction is 100 gsm, so use that value when you want the listed fabric specification. For a different weight, put the target gsm in the request and keep the composition, yarn count and density visible beside it.

Does the color fastness grade stay the same for every shade?

No, the stated result is Grade 3-4 (Light to Dark), so the grade depends on the shade group. Request color approval using the actual light or dark shade required for the shirt range. Keep the selected shade and its applicable grade with the fabric specification before bulk production.

Send a complete fabric specification

Our TC poplin fabric fits shirt programs that need an 80% Polyester, 20% Cotton poplin construction with a 100 gsm reference weight and 58 Inches width. For a quote, send the garment use, target shade group and required fabric specification together.

The company

Hebei Bosswin Textile Technology Co., Ltd

Hebei Bosswin Textile Technology Co., Ltd was established in 1998. The head office is located in Shijiazhuang, the capital city of Hebei Province. And our wholly-owned factory is located in Zhao County Industrial Park with convenient transportation. Our factory now owns 30,000 yarn spindles, mainly producing poly/cotton ( TC ) yarn, i.e. 90/10, 80/20, and 65/35.…

About Us ↗Visit company website ↗
Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.